What did you do to your Fiat lately ?

NGEN · Post by **NGEN** » Sun Jul 21, 2019 9:19 pm

The wheel is so dope - wait till y’all see it in person

FxEpic · Post by **FxEpic** » Mon Jul 22, 2019 1:12 pm

Nice Steering Wheel setup with the quick release, texanbrit.

One of my OEM Fog Lights cracked and the other had a leak so this weekend I Installed Morimoto - Projector LED Fog Lights (don't have pics). It was cheaper than putting OEMs back in and upgrading to LED bulbs. They are much brighter than the OEM but the beam spread is not quite as wide and the up/down beam adjustment is at the rear. The Left side adjustment is fairly accessible but the right side requires some agility, a tiny rachet and an 8mm socket.

* Has anyone bypassed the Fog Light cut-out so that the fogs stay on (if you want) when the Brights come on?

Lucky_lager · Post by **Lucky_lager** » Mon Jul 29, 2019 10:20 am

Blew a hole in piston 3...

YouTube · Post by **texanbrit** » Mon Jul 29, 2019 10:33 am

Lucky_lager wrote: ↑Mon Jul 29, 2019 10:20 am Blew a hole in piston 3...

Noooooo!

Sorry to hear that. The good news is lots of folks have done the donor engine swap now, so it's completely doable if you are up for it.

Cue the theme from The Six Million Dollar man (if you're old enough to remember that).

Romanoaf · Post by **Romanoaf** » Mon Jul 29, 2019 7:46 pm

Swapped in a UNI foam filter to replace the beat up (whatever EC Uses) filter, the lack of manufacturer markings lead me to believe it’s a cheap Chinese filter. Should be temporary before I have time to build an intake with a BMC airbox soon.

: FECC2D6B-3825-4765-9D88-DF6BE054BFE1.jpeg (290.82 KiB) Viewed 7867 times

YouTube · Post by **texanbrit** » Tue Jul 30, 2019 11:01 am

Romanoaf wrote: ↑Mon Jul 29, 2019 7:46 pm Swapped in a UNI foam filter to replace the beat up (whatever EC Uses) filter, the lack of manufacturer markings lead me to believe it’s a cheap Chinese filter. Should be temporary before I have time to build an intake with a BMC airbox soon.
FECC2D6B-3825-4765-9D88-DF6BE054BFE1.jpeg

It's very clean in there

Lucky_lager · Post by **Lucky_lager** » Tue Jul 30, 2019 10:41 pm

texanbrit wrote: ↑Mon Jul 29, 2019 10:33 am
Lucky_lager wrote: ↑Mon Jul 29, 2019 10:20 am Blew a hole in piston 3...
Noooooo!

Sorry to hear that. The good news is lots of folks have done the donor engine swap now, so it's completely doable if you are up for it.

Cue the theme from The Six Million Dollar man (if you're old enough to remember that).

I’m on it. Going to swap one in and rebuild the one I’m pulling.

: E63766B8-DB56-4255-B10C-48278603217F.jpeg (367.21 KiB) Viewed 7784 times

sportfan · Post by **sportfan** » Sun Aug 11, 2019 10:07 pm

I changed the oil and filter today.

sportfan · Post by **sportfan** » Sun Aug 18, 2019 1:54 pm

: DSCF4463.JPG (124.27 KiB) Viewed 7679 times

: DSCF4462.JPG (161.71 KiB) Viewed 7679 times

I installed a tow strap on my 2013 Sport after making a mount.

sportfan · Post by **sportfan** » Mon Sep 02, 2019 7:58 pm

Today I relocated my Antigravity battery to behind the passenger seat.

The Broken Fiat Club

What did you do to your Fiat lately ?

Re: What did you do to your Fiat lately ?

Re: What did you do to your Fiat lately ?

Re: What did you do to your Fiat lately ?

Re: What did you do to your Fiat lately ?

Re: What did you do to your Fiat lately ?

Re: What did you do to your Fiat lately ?

Re: What did you do to your Fiat lately ?

Re: What did you do to your Fiat lately ?

Re: What did you do to your Fiat lately ?

Re: What did you do to your Fiat lately ?