Torque Solutions Bumper Tie-Down Instructions
-
- Posts: 263
- Joined: Thu Sep 20, 2018 11:33 pm
- Location: Ponca City, Ok.
- Your Car's Year / Make / Model: 2013 Fiat 500 Sport
Torque Solutions Bumper Tie-Down Instructions
Does anyone the instructions to the Torque Solutions Bumper tie-Down kit for a 500 that they can post, pm to me, or post a link to them? Thanks.
- NGEN
- Posts: 308
- Joined: Thu Sep 20, 2018 9:12 am
- Location: Conroe, TX
- Your Car's Year / Make / Model: 2013 Fiat 500 Abarth
- Your Instagram (Optional): ngencustomsandperfor
- Contact:
Re: Torque Solutions Bumper Tie-Down Instructions
Remove the front bumper and headlights. Drill the holes where you want to mount them. You can also pull back the inner fenderwells when mounting for added clearance. Pretty easy once everything is out of the way. Just make sure you don't space them out too much. I do 3 inches total distance between the two. Any more then that and the bands will crack/break.
https://www.ngencustomsandperformance.com
Email: info@ngencustomsandperformance.com
Phone/Text: 832-948-9409
Instagram: ngencustomsandperformance
-
- Posts: 263
- Joined: Thu Sep 20, 2018 11:33 pm
- Location: Ponca City, Ok.
- Your Car's Year / Make / Model: 2013 Fiat 500 Sport
Re: Torque Solutions Bumper Tie-Down Instructions
Thanks Bryan. Most of pretty much of what you shared I was down with. I just wondered if there was a certain location say from the edge of the fender that the first hole should be drilled and the space in between to the second set of bolts. I'm assuming that the hole purpose of the kit is to delete the two bolts under the fender liner so the bumper is quicker to remove.
-
- Posts: 60
- Joined: Wed Dec 12, 2018 8:31 am
- Location: Greenville, SC
- Your Car's Year / Make / Model: 13 Abarth 500
- Your Instagram (Optional): tattedmikep
Re: Torque Solutions Bumper Tie-Down Instructions
I bought these from Bryan around the end of 2018, but still haven't put them on yet.
For you guys that have installed these, are you removing the bumper clips (the white ones that are riveted to the fender)?
For you guys that have installed these, are you removing the bumper clips (the white ones that are riveted to the fender)?
-
- Posts: 263
- Joined: Thu Sep 20, 2018 11:33 pm
- Location: Ponca City, Ok.
- Your Car's Year / Make / Model: 2013 Fiat 500 Sport
Re: Torque Solutions Bumper Tie-Down Instructions
I believe the kit is to eliminate the bolts between the bumper cover and fender so you don't have to remove part of the fender liner to get to them. Bryan it's time to get the "How to " video camera out. I haven't found any instruction on these kits on the web.
-
- Posts: 60
- Joined: Wed Dec 12, 2018 8:31 am
- Location: Greenville, SC
- Your Car's Year / Make / Model: 13 Abarth 500
- Your Instagram (Optional): tattedmikep
Re: Torque Solutions Bumper Tie-Down Instructions
^^^^^^^^^^^^^^^^^^^^
This!!!!
This!!!!