How To: Adjust your shifter cable

[NGEN]

HOW TO ADJUST YOUR SHIFTER CABLE:


1. Open hood
2. Remove the battery tray
3. Remove the shift selector cable end pivot coupling from the lever of the transmission
4. Loosen the locknut on the shift selector cable
5. Push the shift lever into the reverse gate while holding the lever in neutral
NOTE: An elastic strap can be used to hold the shifter in the reverse/neutral position
6. Adjust the length of the cable until the pivot end engages the shift lever on the transaxle
7. Snap the shift selector cable end onto the shift lever on the transmission
8. Tighten the locknut
9. Install the battery tray and battery

[doverosx]

Any pictures of this method?