The Broken Fiat Club

on another note, I've also been working on mapping the custom proxi; in hopes that I can figure out how to enable a few things I'm missing with the dash update. If anyone is able to, I'd appreciate if you could show me your current proxi (in MES "Body"> Proxy aliginment>Adjustments>ctrl+al...

thanks for the feedback- yep, I monitor mine through the headunit aswell- I've been playing around with software dynos, and AFR is important information to plot. I believe VCDS will be able to pick generic PIDs- if not I'll give dash command a shot

I just did this install on my car, had the speedo laying around waiting for correct mileage.. did you test with the factory boost gauge at all? Mine won't come on in any byte 65 setting.

Reviving this instead of starting a new thread; with data logging in MES, if there a way to enable viewing actual Lambda 1 equivalence (AFR)? The parameters are only showing status, voltage, and integrator values.. Maybe I'm not seeing something I should be.

Finished product. overall turned out ok. I ended up acetone smoothing, then primer, paint, clear.
Can be polished, but I’m ok with it.. If anyone wants to tackle a similar project, I'd be happy to help.

Yes, I’ll sand and paint the final. I’ll typically use the larger nozzles for work that isn’t as detailed, the first pictures I posted here were on .6 at .35 layer height, not amazing but good enough for fit up.for finish work I’ll use the .4. It’s slow, but I’m happier with the results. I’ve been p...

Pretty'd it up a bit.. dual catch, battery mount

Been slacking on producing a final, it’s a 24hour print, so I want to make sure fitment is dead on.. in the meantime, vent baffles are complete, I feel like they throw air at least as well as factory.

If anyone is interested, I can make the files available to print or machine. battery mount holder designed for 64mm cans, I may expand to a dual setup, in which case I’ll make a prettier dual mount. 08741630-E2BA-49C5-8BD3-586D3CD61222.jpeg 07BA3D4E-EBA7-4F62-A1AF-2B3C36499AD7.jpeg 0ADEA0BB-1ADD-42D...

Happy with V2 fitment, next I’ll be sketching up the vent extensions to guide them to the vents on the fascia; then sand and paint I removed the factory tomtom mount, and replaced it with a microphone holder. Also pictures of my rear view camera placement, haven’t decided what I’m going to do with i...