This was originally posted in the Broken Fiat Club Facebook Group by Daniel Heckmann; copied here for posterity.
This is the passenger side.
If you are having issues moving the shifter front to back, this will most likely be your issue.
First pop the shift link off. Or whatever it's called, the green bit.
Remove the nut, the bolt going through is an allen tip. Either 3/16 or 5/32 if I remember correctly.
The big washer should slide off with the bushing in it.
Remove the bushing from the middle of the washer and make sure they're both nice and smooth and have no pitting or gouging.
If they do just polish them both up and grease em up before reassembly.
CAE Ultrashifter binding up
- texanbrit
- Posts: 755
- Joined: Wed Sep 19, 2018 11:01 pm
- Location: Conroe, TX
- Your Car's Year / Make / Model: 2013 500c Abarth
- Your Instagram (Optional): paul_rogerson_tx
- Contact:
CAE Ultrashifter binding up
2013 Abarth 500c (NGen Turbo'd) - Isabella
2012 500 Pop (broken, engine rebuild on hold) - Popabella
2014 500L (Daily workhorse) - The Hulk
2013 Abarth 500 (broken engine, current project) - Abby
2012 500 Pop (broken, engine rebuild on hold) - Popabella
2014 500L (Daily workhorse) - The Hulk
2013 Abarth 500 (broken engine, current project) - Abby
- MadFiat
- Site Admin
- Posts: 593
- Joined: Wed Sep 19, 2018 10:42 pm
- Location: Beaumont, TX
- Your Car's Year / Make / Model: 2015 Fiat 500 Abarth
- Your Instagram (Optional): madfiat
- Xbox ID (Optional): madfiat
- Contact:
Re: CAE Ultrashifter binding up
Good tip!
2015 Rosso Abarth 5MT - MAD FIAT - EC Phase 2 + Supporting Mods
2015 Granito Lucente 500T 6AT - Projecto Estupido
2017 Fiat 124 Spider 6MT - Another one???
2015 Granito Lucente 500T 6AT - Projecto Estupido
2017 Fiat 124 Spider 6MT - Another one???