New to the club

You MUST post in this forum BEFORE you can post in any other forum.
User avatar
Damnyoutaco
Posts: 20
Joined: Thu Sep 20, 2018 8:48 pm
Your Car's Year / Make / Model: 2015/Fiat/Abarth
Your Instagram (Optional): Damnyoutaco

New to the club

Post by Damnyoutaco » Fri Sep 21, 2018 8:21 am

Hello all. I drive a 2015 Abarth in the great white north. Looking forward to share and learn with everyone here. :D

Mod list:
-Corsa Strada vertical and horizontal chassis braces
-Neuf rear bar
-AAD shifter with 595 Turismo carbon knob
-GFB DV+
-Cavalino narca and extractor vents
Image
Corsa Forza tunnel & vertical braces
Neuf rear bar
AAD shifter with CF 595 Turismo shift knob
Cavalino NACA + extractor
MPX axel back exhaust
GFB DV+
Koni yellow sport rear shocks
Euro Fiat coupe bump stops
R1 Eline drilled rotors F/R with Hawk 5.0

User avatar
Mangavideo
Posts: 111
Joined: Thu Sep 20, 2018 10:24 am
Location: Virginia
Your Car's Year / Make / Model: 2013 Abarth 500c
PlayStation ID (Optional): UKCoachCalipari
Contact:

Re: New to the club

Post by Mangavideo » Fri Sep 21, 2018 8:33 am

Welcome

Love the Hood Vents. Hopefully you post some photos of those interior braces. Who is your outfitter or did you DIY?
"Initially, it was a search for practicality. Ultimately, it was a decision of Passion"

BecauseAbarth
Posts: 27
Joined: Thu Sep 20, 2018 12:45 pm
Location: Fort Worth, TX
Your Car's Year / Make / Model: 2014 Fiat Abarth

Re: New to the club

Post by BecauseAbarth » Fri Sep 21, 2018 8:45 am

Welcome , I also like the vents - wonder what the numbers on helping reduce heat in the engine bay are -

User avatar
texanbrit
Posts: 755
Joined: Wed Sep 19, 2018 11:01 pm
Location: Conroe, TX
Your Car's Year / Make / Model: 2013 500c Abarth
Your Instagram (Optional): paul_rogerson_tx
Contact:

Re: New to the club

Post by texanbrit » Fri Sep 21, 2018 9:20 am

Car looks sharp! Welcome to the group.

What tray do you run under your vents? If any.
2013 Abarth 500c (NGen Turbo'd) - Isabella
2012 500 Pop (broken, engine rebuild on hold) - Popabella
2014 500L (Daily workhorse) - The Hulk
2013 Abarth 500 (broken engine, current project) - Abby

User avatar
Damnyoutaco
Posts: 20
Joined: Thu Sep 20, 2018 8:48 pm
Your Car's Year / Make / Model: 2015/Fiat/Abarth
Your Instagram (Optional): Damnyoutaco

Re: New to the club

Post by Damnyoutaco » Fri Sep 21, 2018 10:52 am

Thanks for the kind words everybody! :mrgreen:

The ACS/Cavalino kit comes with a rain tray that drains at the very front edge of the hood past the latch line, so the water actually drains towards the outside of the engine bay. This is my daily driver and it's driven the way it was meant to be driven. This car has experienced -40 Celsius to +35 Celsius weather and my number one priority with the vents was to maintain all weather drivability. The rain tray is attached by the 4 factory plastic clip and can be easily removed in less than a minute.

Surprisingly the vents still make a noticeable difference in heat soaking even with the rain tray. The two large circular cut outs on either side of the vent channels
provide decent amount of airflow. (You can kind of see it on the top right corner of the tray in the pic)

With the tray off you can visibly see the heat waves radiating from the extractor(driver) side. I even did a DIY smoke test with my vape to see if the air really flows into the narca vent and exit from the extractor. :lol:

Unfortunately I did not do a before and after comparison test with an actual temp gauge. However I did notice a very interesting side effect: I always felt the AC unit was under powered for hot summer days. After the vents were installed the AC cooled significantly faster.

It just started snowing in the great white north so I'll post some snowy pics and updates once I put my winter set on. Monza 15x6.5 wrapped in Pierelli Ice Zero studded 185-60-15

Image
Image
Corsa Forza tunnel & vertical braces
Neuf rear bar
AAD shifter with CF 595 Turismo shift knob
Cavalino NACA + extractor
MPX axel back exhaust
GFB DV+
Koni yellow sport rear shocks
Euro Fiat coupe bump stops
R1 Eline drilled rotors F/R with Hawk 5.0

User avatar
Damnyoutaco
Posts: 20
Joined: Thu Sep 20, 2018 8:48 pm
Your Car's Year / Make / Model: 2015/Fiat/Abarth
Your Instagram (Optional): Damnyoutaco

Re: New to the club

Post by Damnyoutaco » Fri Sep 21, 2018 10:55 am

Mangavideo wrote: Fri Sep 21, 2018 8:33 am Welcome

Love the Hood Vents. Hopefully you post some photos of those interior braces. Who is your outfitter or did you DIY?
The Corsa Strada braces are for the sub frame. The install was done by a local shop. Painted and installed for $350 Cad. (Like 2 dollars USD? :mrgreen: )
Corsa Forza tunnel & vertical braces
Neuf rear bar
AAD shifter with CF 595 Turismo shift knob
Cavalino NACA + extractor
MPX axel back exhaust
GFB DV+
Koni yellow sport rear shocks
Euro Fiat coupe bump stops
R1 Eline drilled rotors F/R with Hawk 5.0

Return to “Welcome Mat”