Replacing a Transmission / Axle Bearing
-
- Posts: 263
- Joined: Thu Sep 20, 2018 11:33 pm
- Location: Ponca City, Ok.
- Your Car's Year / Make / Model: 2013 Fiat 500 Sport
Replacing a Transmission / Axle Bearing
Has anyone replaced the driver’s side transmission axle bearing( not the hub bearing) ? It looks like they put some form of retaining compound between the outer race and transmission bore. I know high strength grades of these compounds will require heat to make them release their grip. I had a seal leak and while I was replacing it I thought I do the bearing also. I’ve tried two types of bearing pullers with slide hammers with no luck at all. The transmission has a split line there with two bolts that if loosened might help free up the bearing. This may also cause another leak. It may be possible to pull the other axle and reach through with a long punch and tap the bearing out.
-
- Posts: 263
- Joined: Thu Sep 20, 2018 11:33 pm
- Location: Ponca City, Ok.
- Your Car's Year / Make / Model: 2013 Fiat 500 Sport
Re: Replacing a Transmission / Axle Bearing
After talking with people that have worked on these transmissions ,it appears that the transmission will need to be pulled and split to change the bearing. If I have to pull the trans. I'm looking at maybe a clutch ,LSD, lightened flywheel, and the Bacci Romano final drive
- texanbrit
- Posts: 755
- Joined: Wed Sep 19, 2018 11:01 pm
- Location: Conroe, TX
- Your Car's Year / Make / Model: 2013 500c Abarth
- Your Instagram (Optional): paul_rogerson_tx
- Contact:
Re: Replacing a Transmission / Axle Bearing
It would be interesting to see what options you find for an aftermarket options for your Sport. I haven't seen much for the non-turbo 500s.
2013 Abarth 500c (NGen Turbo'd) - Isabella
2012 500 Pop (broken, engine rebuild on hold) - Popabella
2014 500L (Daily workhorse) - The Hulk
2013 Abarth 500 (broken engine, current project) - Abby
2012 500 Pop (broken, engine rebuild on hold) - Popabella
2014 500L (Daily workhorse) - The Hulk
2013 Abarth 500 (broken engine, current project) - Abby
-
- Posts: 263
- Joined: Thu Sep 20, 2018 11:33 pm
- Location: Ponca City, Ok.
- Your Car's Year / Make / Model: 2013 Fiat 500 Sport
Re: Replacing a Transmission / Axle Bearing
Bryan is working with Clutchmasters on building a clutch for it I believe . I'm waiting on a LSD to be made in Italy that will fit it.