Clutch Question
-
- Posts: 263
- Joined: Thu Sep 20, 2018 11:33 pm
- Location: Ponca City, Ok.
- Your Car's Year / Make / Model: 2013 Fiat 500 Sport
Clutch Question
I was trying to finish up some mods on my 13' Sport today. I had changed all the OEM rubber brake lines out to the Neu-f stainless ones and front calipers ,disc, and pads for Abarth OEM front brakes. All I had to do was bleed the brakes. That went fine , no leaks and pedal doesn't hardly move. While the power bleeder was still pressured up I bled the clutch . When I checked out the clutch pedal , it went straight to the floor and stayed there. I thought the return spring would have returned the pedal but, it stayed on the floor. Have I broke something or do I need to bleed it more? Anyone been through this ?
- MadFiat
- Site Admin
- Posts: 593
- Joined: Wed Sep 19, 2018 10:42 pm
- Location: Beaumont, TX
- Your Car's Year / Make / Model: 2015 Fiat 500 Abarth
- Your Instagram (Optional): madfiat
- Xbox ID (Optional): madfiat
- Contact:
Re: Clutch Question
There is no return spring (or at least not of any consequence) - the hydraulic pressure returns the clutch pedal. On my Abarth it took me FOREVER to get enough air out for the clutch to return. Not sure on the Sport, but on the Abarth the manual says 50 pumps of the clutch. It took may many multiples more than that. I am sure I did several hundred.
2015 Rosso Abarth 5MT - MAD FIAT - EC Phase 2 + Supporting Mods
2015 Granito Lucente 500T 6AT - Projecto Estupido
2017 Fiat 124 Spider 6MT - Another one???
2015 Granito Lucente 500T 6AT - Projecto Estupido
2017 Fiat 124 Spider 6MT - Another one???
- texanbrit
- Posts: 755
- Joined: Wed Sep 19, 2018 11:01 pm
- Location: Conroe, TX
- Your Car's Year / Make / Model: 2013 500c Abarth
- Your Instagram (Optional): paul_rogerson_tx
- Contact:
Re: Clutch Question
If it’s still not returning after a large number of pumps perhaps the slave gave out?
2013 Abarth 500c (NGen Turbo'd) - Isabella
2012 500 Pop (broken, engine rebuild on hold) - Popabella
2014 500L (Daily workhorse) - The Hulk
2013 Abarth 500 (broken engine, current project) - Abby
2012 500 Pop (broken, engine rebuild on hold) - Popabella
2014 500L (Daily workhorse) - The Hulk
2013 Abarth 500 (broken engine, current project) - Abby
-
- Posts: 263
- Joined: Thu Sep 20, 2018 11:33 pm
- Location: Ponca City, Ok.
- Your Car's Year / Make / Model: 2013 Fiat 500 Sport
Re: Clutch Question
Thanks, Paul. I guess I'll bleed it out again.
-
- Posts: 263
- Joined: Thu Sep 20, 2018 11:33 pm
- Location: Ponca City, Ok.
- Your Car's Year / Make / Model: 2013 Fiat 500 Sport
Re: Clutch Question
Bleeding it many times took care of it. Today was the first time in over a month I got to drive the car. After not driving the car for while it was hard to determine what difference the Uniballs made. It will take another run at Twisted to tell maybe. Then if thing go as planned ,I will have the LSD in the car which would make a big difference.
- texanbrit
- Posts: 755
- Joined: Wed Sep 19, 2018 11:01 pm
- Location: Conroe, TX
- Your Car's Year / Make / Model: 2013 500c Abarth
- Your Instagram (Optional): paul_rogerson_tx
- Contact:
Re: Clutch Question
sportfan wrote: ↑Sat Feb 27, 2021 4:52 pm Bleeding it many times took care of it. Today was the first time in over a month I got to drive the car. After not driving the car for while it was hard to determine what difference the Uniballs made. It will take another run at Twisted to tell maybe. Then if thing go as planned ,I will have the LSD in the car which would make a big difference.
Glad it was just some air!
2013 Abarth 500c (NGen Turbo'd) - Isabella
2012 500 Pop (broken, engine rebuild on hold) - Popabella
2014 500L (Daily workhorse) - The Hulk
2013 Abarth 500 (broken engine, current project) - Abby
2012 500 Pop (broken, engine rebuild on hold) - Popabella
2014 500L (Daily workhorse) - The Hulk
2013 Abarth 500 (broken engine, current project) - Abby